RD2000 - Pedal setup for B3 program

Stage Piano

RD2000 - Pedal setup for B3 program

Postby darrylhebert » 17:22, 5 October 2017

Is there a way to set the sustain pedal to act as rotor on/off?
darrylhebert
 
Posts: 2
Joined: 17:19, 5 October 2017


Re: RD2000 - Pedal setup for B3 program

Postby DesertBoat » 04:20, 6 October 2017

There does not appear to be any assignment for sustain in the Program Edit / Pedal Assign menu. The only adjustment to sustain is the ability to tell a zone not to respond to sustain. (Zone edit / Pedal menu page)

The other three pedal inputs are fully assignable.

Another foot switch is cheap enough, or if an organist who doesn't need sustain, just swap the sustain to one of the other three pedal inputs.
DesertBoat
 
Posts: 5
Joined: 01:49, 5 October 2017

Re: RD2000 - Pedal setup for B3 program

Postby darrylhebert » 17:21, 6 October 2017

Thanks for the reply.

I currently use 3 pedals with the RD2000 - sustain, FC1 - rotor on/off, FC2 - program change up.

I was hoping to eliminate a pedal...oh well...
darrylhebert
 
Posts: 2
Joined: 17:19, 5 October 2017


Return to RD-2000

Who is online

Users browsing this forum: No registered users and 1 guest