RD2000 editor v 3.1 free
Re: RD2000 editor v 3.1 free
Thanks Gus,
We are almost there :-)
I will sort out these remaining issues and the post next version.
Thank you
Stuart
We are almost there :-)
I will sort out these remaining issues and the post next version.
Thank you
Stuart
Re: RD2000 editor v 3.5.4 updated - free
Hi Gus,
Ive found the bugs. So Ive updated the code and loaded the latest version of 3,5,4 on my website.
The coding and testing is almost done ! :-)
Cheers
Stuart
Ive found the bugs. So Ive updated the code and loaded the latest version of 3,5,4 on my website.
The coding and testing is almost done ! :-)
Cheers
Stuart
Re: RD2000 editor v 3.1 free
Hi stuart.
now "guitar amp" is OK.
the -1 depth offset still remains in MKS 20.
Example, when I set depth +15 on RD, the application interprets +14
now "guitar amp" is OK.
the -1 depth offset still remains in MKS 20.
Example, when I set depth +15 on RD, the application interprets +14
Re: RD2000 editor v 3.1 free
Thanks Gus.
You've done a brilliant job testing.
I will upload version 3.5.5 as a stable release later with docs. If you find any bugs let me know. Were 99.9% there. I will look at that slider issue. Showing 14 when should be 15.
Thanks again.
Stuart
You've done a brilliant job testing.
I will upload version 3.5.5 as a stable release later with docs. If you find any bugs let me know. Were 99.9% there. I will look at that slider issue. Showing 14 when should be 15.
Thanks again.
Stuart
Re: RD2000 editor v 3.5.5 - final release free
Hi Gus.
The problem with MKs 20 is that the RD allows Depth values between 1 and 15. But the parameter manual says it goes between 0 and 15? Anyway ive fixed the code so it matches the RD. So when RD is 15 software = 15. When RD is 1 software =1 :-)
Version 3.5.5 is now on my website with latest docs.
Let me know of any bugs you find and thanks for all your testing :-)
Cheers
Stuart
The problem with MKs 20 is that the RD allows Depth values between 1 and 15. But the parameter manual says it goes between 0 and 15? Anyway ive fixed the code so it matches the RD. So when RD is 15 software = 15. When RD is 1 software =1 :-)
Version 3.5.5 is now on my website with latest docs.
Let me know of any bugs you find and thanks for all your testing :-)
Cheers
Stuart
Re: RD2000 editor v 3.1 free
Hi Stuart.
Version 3.5.5.
Everything works fine for tremolo/amp sim.
There remains the "External" part which does not seem to work.
The commands in the app command the RD fine but don't retrieve the values.
Version 3.5.5.
Everything works fine for tremolo/amp sim.
There remains the "External" part which does not seem to work.
The commands in the app command the RD fine but don't retrieve the values.
Re: RD2000 editor v 3.1 free
Hi Gus.
Arhh..Its the knob functsions a5 to a8. OK ...i will sort out.
Cheers
Stuart
Arhh..Its the knob functsions a5 to a8. OK ...i will sort out.
Cheers
Stuart
Re: RD2000 editor v 3.5.5 updated free
Hi Gus,
Ive found the bug in the Knob functions a5 to a8. Ive updated and uploaded version 3.5.5 to my website.
sorry for not answering earlier...you said...
'A question: What function corresponds to each CC#?
Is there a list?'
It depends what instrument receives the CC messages. But in the Midi spec for instance...CC2 breath controller, CC3 undefined. CC4 foot pedal. CC14 to 31 are undefined - free to use for whatever function a manufacturer decided. 32 is Bank Select. 33 Mod wheel etc. If you google CC messages there are lists of all of them. The RD Midi implimentation defines the ones the RD responds to.
I think the Mod knobs and joy stick on the Korg wavestate respond to CC 14 to 21 and the Opsix knobs are probably similar . The CCs will be stated in the Opsix manual. So you can control some of the Opsix from the RD.
Thank you
Stuart
Ive found the bug in the Knob functions a5 to a8. Ive updated and uploaded version 3.5.5 to my website.
sorry for not answering earlier...you said...
'A question: What function corresponds to each CC#?
Is there a list?'
It depends what instrument receives the CC messages. But in the Midi spec for instance...CC2 breath controller, CC3 undefined. CC4 foot pedal. CC14 to 31 are undefined - free to use for whatever function a manufacturer decided. 32 is Bank Select. 33 Mod wheel etc. If you google CC messages there are lists of all of them. The RD Midi implimentation defines the ones the RD responds to.
I think the Mod knobs and joy stick on the Korg wavestate respond to CC 14 to 21 and the Opsix knobs are probably similar . The CCs will be stated in the Opsix manual. So you can control some of the Opsix from the RD.
Thank you
Stuart
Re: RD2000 editor v 3.1 free
Hi Stuart.
for "external zone", the application only loads the state of a few switches.
the rest doesn't seem to work.
for "external zone", the application only loads the state of a few switches.
the rest doesn't seem to work.
Re: RD2000 editor v 3.5.5 free
Hi Gus.
I will sort it out. I think I know where to look to fix the code.
Cheers
Stuart
I will sort it out. I think I know where to look to fix the code.
Cheers
Stuart
Re: RD2000 editor v 3.5.5 updated free
Hi Gus,
Ive updated the code for the external zone form, found some bugs, It should work now :-) Updated version 3.5.5 on my website now.
Thank you
Stuart
Ive updated the code for the external zone form, found some bugs, It should work now :-) Updated version 3.5.5 on my website now.
Thank you
Stuart
Re: RD2000 editor v 3.1 free
Hi Stuart.
last version
"external area"
everything is OK for the upper part "keyboard" and "midi", except for a small anomaly in "midi"
LSB slider works well in reception, it controls LSB on RD = OK.
Program cursor also commands LSB on RD = no Ok
what is correct for the programe cursor (PC on RD) correctly receives its correct value.
The section at the bottom "midi other" seems to retrieve nothing.
(half works correctly I will continue tomorrow)
last version
"external area"
everything is OK for the upper part "keyboard" and "midi", except for a small anomaly in "midi"
LSB slider works well in reception, it controls LSB on RD = OK.
Program cursor also commands LSB on RD = no Ok
what is correct for the programe cursor (PC on RD) correctly receives its correct value.
The section at the bottom "midi other" seems to retrieve nothing.
(half works correctly I will continue tomorrow)
Re: RD2000 editor v 3.5.5 updated free
Hi Gus,
I found a couple more bugs and updated version 3.5.5 on my website.
PS, When loading the settings make sure you select the external zone number first.
We are almost there .
cheers
Stuart
I found a couple more bugs and updated version 3.5.5 on my website.
PS, When loading the settings make sure you select the external zone number first.
We are almost there .
cheers
Stuart
Re: RD2000 editor v 3.1 free
Hi Stuart.
Last version.
"External Area"
Now everything is working correctly.
all that remains is to rename the "delay send" slider to "chorus send" it affects "CHO" on the RD the slider adjusts the chorus amplitude level see (page 17 parameter guide).
the goal of perfection is almost achieved.
Cheer.
Last version.
"External Area"
Now everything is working correctly.
all that remains is to rename the "delay send" slider to "chorus send" it affects "CHO" on the RD the slider adjusts the chorus amplitude level see (page 17 parameter guide).
the goal of perfection is almost achieved.
Cheer.
Re: RD2000 editor v 3.5.6 free
Hi Gus.
Version 3.5.6 is now on my website. Chorus send is now named properly.
Is there anything else you need to test or are we there?
Thank you for your hard work.
Cheers
Stuart
Version 3.5.6 is now on my website. Chorus send is now named properly.
Is there anything else you need to test or are we there?
Thank you for your hard work.
Cheers
Stuart