It sends pc to the mc101 , via note data , kind of a song mode ,where you input everything to the mc , and logic switches scenes for you .
https://www.dropbox.com/s/dc6ul0dkxy9rifb/MCLOGIC SONG MODE.zip?dl=0
I’m not a logic expert , so not sure why but You have to unarm the track for it to play properly.
The intervals between the steps will play all 8 mc bars or loop your pattern to that amount.
The mc has 16 clips on each track set to 16 scenes numerically.
You can edit a clip note data whilst it’s playing, by selecting the clip to edit , you cannot edit cc this way , you can only edit the playing pattern, so you may want to stop the sequencer.
A cell in logic will play 8 scenes/64 bars
You can change the loop point for the cell ,if you want to zoom in on one or a smaller part of the mc clips.
Whilst it’s 64 bars the Start is 1.1 the end is 65.1
I have some drums on trk2 and bass on trk3 , I was making sure everything played in sync and I added some changes to some cc ,to see what was going on , at worst I think the mc is a beat behind logic
Let me know if you want any more info , I came up with this earlier today , after trying the traditional pc draw automation lane , then the list editor, but this is definitely the quickest and easiest way , I think ?
You can add more scenes by adding a cell and continuing on from the notes after the second cell in the step sequencer.
Here some logic tutorials that helped me learn the step sequencer
https://www.gearslutz.com/board/apple-l ... annel.html
And you can then drag the cells to logics timeline or record them live etc to arrange them