sync Kaossilator Pro to mv8800 ( help!!!)
sync Kaossilator Pro to mv8800 ( help!!!)
the mv8800 is recieving the MIDI signal and i can see it on the sequencer but it doesnt sound. Does somebody know what could be the problem?
Re: sync Kaossilator Pro to mv8800 ( help!!!)
Could be a number of things…
Take a look at the Roland Workshop doc 12 - “Using the MV-8800 with an External Sequencer”
this walks you thru the various setup and settings.
http://cms.rolandus.com/assets/media/pdf/MV8800WS12.pdf
e.g. page 4 - check setting .... SYSTEM > Multi Timbre Sampler Mode >
[ Also see Workshop 11 http://www.rolandus.com/uploads/CMS/Dow ... 00WS11.pdf "Working with external midi instruments" ]
Take a look at the Roland Workshop doc 12 - “Using the MV-8800 with an External Sequencer”
this walks you thru the various setup and settings.
http://cms.rolandus.com/assets/media/pdf/MV8800WS12.pdf
e.g. page 4 - check setting .... SYSTEM > Multi Timbre Sampler Mode >
[ Also see Workshop 11 http://www.rolandus.com/uploads/CMS/Dow ... 00WS11.pdf "Working with external midi instruments" ]