MV-8000 hard drive to solid state drive?
Re: MV-8000 hard drive to solid state drive?
I installed KingSpec 64GB SSD drive.
Works without problems. Speed increase is notable, but it's still a bit slow (compared to a modern computer, that is)
http://www.amazon.com/KingSpec-2-5-inch ... B008RWKFYE
Works without problems. Speed increase is notable, but it's still a bit slow (compared to a modern computer, that is)
http://www.amazon.com/KingSpec-2-5-inch ... B008RWKFYE
Re: MV-8000 hard drive to solid state drive?
Damn I wish you would have recorded loading and saving a project before you switched drives and then used same files to load and save with the new drive. Can you give exact instructions so I don't screw this up. I'm going to give it a shot and record my results.
Re: MV-8000 hard drive to solid state drive?
I wonder what drive would work directly with an MV-8000. The drive is larger than the 2.5 drives in the MV-8800.
Re: MV-8000 hard drive to solid state drive?
I guess you could fasten it down with Velcro.
Re: MV-8000 hard drive to solid state drive?
But are not the pins different too on hard drives of different sizes?waxdat wrote:I guess you could fasten it down with Velcro.
Re: MV-8000 hard drive to solid state drive?
If so I believe there are adapter cables out there.
Re: MV-8000 hard drive to solid state drive?
If so I believe there are adapter cables out there.
Re: MV-8000 hard drive to solid state drive?
Or as per NNitred
"You can use a an IDE SSD like those from Kingspec orany early PATA models from Intel and they work fine. The main advantage is that the SSD doesn't bog down as it fills. OTOH the MV has a major bottle neck so you projects and sample won't load with any kind of blazing speed."
"You can use a an IDE SSD like those from Kingspec orany early PATA models from Intel and they work fine. The main advantage is that the SSD doesn't bog down as it fills. OTOH the MV has a major bottle neck so you projects and sample won't load with any kind of blazing speed."
Re: MV-8000 hard drive to solid state drive?
You mean instructions for swapping the drive?waxdat wrote:Can you give exact instructions so I don't screw this up. I'm going to give it a shot and record my results.
It's dead easy, no tricks involved. Just open the machine and plug'n'play. :)
Re: MV-8000 hard drive to solid state drive?
Not the physical part. The file transfer part. Did you use a transfer gadget like in that video?Seccione wrote:You mean instructions for swapping the drive?waxdat wrote:Can you give exact instructions so I don't screw this up. I'm going to give it a shot and record my results.
It's dead easy, no tricks involved. Just open the machine and plug'n'play. :)
Re: MV-8000 hard drive to solid state drive?
Video? Gadged? Huh? :Dwaxdat wrote:Not the physical part. The file transfer part. Did you use a transfer gadget like in that video?
No I just copied stuff to PC trough USB. Slow as hell, but I had beer.
Re: MV-8000 hard drive to solid state drive?
Just for you guys who need to know the MV harddrive and the connections (not real MV pictures but you get the idea):
MV-8000 has a 3.5" PATA/IDE 40 pin desktop harddrive:
MV-8800 has a 2.5" PATA/IDE 44 pin laptop harddrive:
To use a SATA harddrive (platter or SSD) in place of the stock MV PATA harddrives, the adapter you will need is:
For the MV8000 you need a PATA to SATA desktop adapter
For the MV8800 you need a PATA to SATA laptop adapter
*If you want to get either adapter, definitely get an adapter with a jumper connection to select Master for the internal MV harddrive.
MV-8000 has a 3.5" PATA/IDE 40 pin desktop harddrive:
MV-8800 has a 2.5" PATA/IDE 44 pin laptop harddrive:
To use a SATA harddrive (platter or SSD) in place of the stock MV PATA harddrives, the adapter you will need is:
For the MV8000 you need a PATA to SATA desktop adapter
For the MV8800 you need a PATA to SATA laptop adapter
*If you want to get either adapter, definitely get an adapter with a jumper connection to select Master for the internal MV harddrive.
-
- Posts: 12
- Joined: 23:57, 12 April 2013
Re: MV-8000 hard drive to solid state drive?
I'm with waxdat on this. A while ago (when SSDs were still really expensive), I swapped out the factory 4200RPM drive in my 8800 for a 7200RPM. When I did that exact same thing with a laptop a year earlier, it made a *big* difference in speed, so I was hoping that the MV would be a lot faster with the 7200 RPM. No such luck, it was only very slightly faster. I looked up the notes I made at the time comparing them (for each, the first time is the 4200RPM and the 2nd time is the 7200). Both the original and replacement drive were only about 5% full at the time of the tests.waxdat wrote:Damn I wish you would have recorded loading and saving a project before you switched drives and then used same files to load and save with the new drive.
Load a 39MB project: :46 - :43
Save a 39 MB project: :41 - :36
"Save As" the 39MB proj: 1:31 - 1:18
I also tested both smaller and much larger project sizes, and the time differences were right in line with the above.
I also tried exporting a 42MB sample as a WAV file, both drives took the exact same amount of time (1:14) so it's clearly gated by the processing time the MV needs to reformat the sample.
Now that SSDs are so cheap, yeah, it probably makes sense to put one in the MV but until I see some actual time measurements (comparing a HD to an SSD), I'm going to assume that any speed increase will be very slight.
Re: MV-8000 hard drive to solid state drive?
SSD doesn't make much difference to 7200rpm drive. the PATA/IDE connector is the bottleneck here.
With SSD you get a silent drive without heat generation, and presumably no slowing down when the drive gets fragmented.
(My MV had a very fragmented drive, so after switching to SSD the difference was major!)
With SSD you get a silent drive without heat generation, and presumably no slowing down when the drive gets fragmented.
(My MV had a very fragmented drive, so after switching to SSD the difference was major!)
Re: MV-8000 hard drive to solid state drive?
Wanted to know if anyone has had success installing a 128GB KingSpec SSD in their MV!? Looking to install 1 in my MV and VS-2400CD! Please let me know if this sounds like a good idea. Thanks.