MV-OP1 & VS 2480 via R-Bus not showing up

Forum for MV-8000/8800
Post Reply
erange
Posts: 17
Joined: 21:09, 19 October 2015

MV-OP1 & VS 2480 via R-Bus not showing up

Post by erange »

MV is 1.01
VS is 2.505

It only shows up as 'UNCONNECTED''
When I shut down the VS, the MV will say 'MIDI Connection lost'
Mistamixx1
Posts: 17
Joined: 06:00, 10 October 2015

Re: MV-OP1 & VS 2480 via R-Bus not showing up

Post by Mistamixx1 »

erange wrote:MV is 1.01
VS is 2.505

It only shows up as 'UNCONNECTED''
When I shut down the VS, the MV will say 'MIDI Connection lost'
Does the card show up properly on the mv?
http://www.roland.com/support/by_produc ... s_manuals/
erange
Posts: 17
Joined: 21:09, 19 October 2015

Re: MV-OP1 & VS 2480 via R-Bus not showing up

Post by erange »

yes, i see it in the corner on boot up & in Systems menu.
Lonewolf360
Posts: 13
Joined: 11:05, 17 December 2015

Re: MV-OP1 & VS 2480 via R-Bus not showing up

Post by Lonewolf360 »

does anyone want to sell their MV8-0p1, let me know right away, I need two of them for both my MV8800's, Roland should have never discontinued them! Email me at JaonsLyric360@gmail.com serious folks only, and don't flood my mail box spammers. I'll pay 500 for it! I need it to transfer digital audio via R-Bus, and for outputting analog audio to my digital mixer, then to whatever else I want.
Newbiwson
Posts: 2
Joined: 04:27, 23 May 2016
Contact:

Re: MV-OP1 & VS 2480 via R-Bus not showing up

Post by Newbiwson »

This is beyond my knowledge so that I have enough.
Post Reply