I have problem with Roland MS-1 Digital sampler.
After I update firmware in this instrument with original smf file from Roland Ftp internet sites and restarting machine My memory banks A and B can´t be read. If pressing A/B pads in some time for entering to bank C or banks D,E in card memory banks and samples saved there cannot be read or resampling with new records.
PLEASE any who have other original smf update firmware, or any people with midi sequencer and interference who can be dumping memory from Ms-1 instrument ?
Or other help for this problem ?
Sampler MS-1
Re: Sampler MS-1
try to format the card and perform System Reset... this may help .... or may not..... doing so will erase everything in memory and maybe after your sampler will work again
Boot Up problems
Hey, I have an MS-1 and ma having trouble powering it up.
I recently reorganized my workspace and unplugged it and plugged it back in.
It's getting power, the LED screen reads "Roland" but it seems frozen in that stage of the boot up process.
Any help?
Thanks
Josh
I recently reorganized my workspace and unplugged it and plugged it back in.
It's getting power, the LED screen reads "Roland" but it seems frozen in that stage of the boot up process.
Any help?
Thanks
Josh
-
- Posts: 1
- Joined: 00:17, 21 March 2011
Re: Sampler MS-1
hi
I have a similar problem.
since I tried (several times) to load the mid file firmware
found on roland official site, my MS-1 is in coma.
During the download the display turned from "receiving" to "waiting for the next".
Every time I try to load it, changing the transfert speed it displays the same message.
In the end it is frozen and when turned on it only says "roland".
does anyone know anything about this procedure, about the file,
could anyone help us please?
?
whee could we find a file that works?
maybe there is a tip for doing this ?
?
please
I have a similar problem.
since I tried (several times) to load the mid file firmware
found on roland official site, my MS-1 is in coma.
During the download the display turned from "receiving" to "waiting for the next".
Every time I try to load it, changing the transfert speed it displays the same message.
In the end it is frozen and when turned on it only says "roland".
does anyone know anything about this procedure, about the file,
could anyone help us please?
?
whee could we find a file that works?
maybe there is a tip for doing this ?
?
please
Re: Sampler MS-1
Yep, same issue here.
I noticed on the internet, EVERYONE has that problem ...
Not funny :-(
I noticed on the internet, EVERYONE has that problem ...
Not funny :-(
Re: Sampler MS-1
Hi people, i got working version of Roland MS-1 from roland site, but its version is 1.12, cause roland guys says that v1.13 is not working properly, this version will help to give breath to your crached devices vith v1.13:))
i attached link with manual
http://www.mediafire.com/download/axl2f ... +v1.12.zip
i attached link with manual
http://www.mediafire.com/download/axl2f ... +v1.12.zip
Re: Sampler MS-1
I just bricked a perfectly good MS-1 trying to update it with this official Roland support file:
http://www.rolandus.com/support/general_apps_tools/1696
Don't do it, no matter how tempted you are to get the latest update. Mine just says "Roland" when powered on, forever.
http://www.rolandus.com/support/general_apps_tools/1696
Don't do it, no matter how tempted you are to get the latest update. Mine just says "Roland" when powered on, forever.