Juno-G Micro Manual

Forum for JUNO-G
User avatar
Artemiy
Site Admin
Posts: 19754
Joined: 13:00, 17 April 2003
Location: Ukraine
Contact:

Re: Juno-G Micro Manual

Post by Artemiy »

wooperman, I think you are just treating the Juno in a wrong way. What you thought of as a "patch" is in fact a "performance". So you are switching sets of 16 layered/split patches, not single patches.

All you need to do is start from a clear performance, and assign the patches you want to the part 1 to 16. Then, you can switch between these parts from the mixer, using the cursor buttons. Or, you can do it from the sequencer too, since the parts are automatically tied to the tracks: in this case, switch between the parts using the up and down cursor buttons.

If you have any other questions, I would like to ask you to start a new topic.
jyothish
Posts: 5
Joined: 08:33, 20 September 2011

Re: Juno-G Micro Manual

Post by jyothish »

Thanks Mr Artemiy for such a beautiful manual. b.t.w. my J.G too is suffering of a bad display.
gxr
Posts: 10
Joined: 01:11, 16 May 2011

Re: Juno-G Micro Manual

Post by gxr »

The link to the manual is broken. Can you please re-post?
JunoJohn
Posts: 815
Joined: 08:29, 24 February 2008
Location: Washington DC

Re: Juno-G Micro Manual

Post by JunoJohn »

Juno-G Micro Manual

Also check out the rest of the Library page on the Juno-G.
estevan2
Posts: 1
Joined: 21:55, 16 August 2012

Re: Juno-G Micro Manual

Post by estevan2 »

gracias pero me sale que el enlace esta roto
Balance
Posts: 5
Joined: 05:39, 6 February 2013

Re: Juno-G Micro Manual

Post by Balance »

Manual isnt working anymore :/
User avatar
inversecow
Posts: 3
Joined: 19:19, 10 May 2013
Location: Victoria, British Columbia, Canada

Re: Juno-G Micro Manual

Post by inversecow »

Balance wrote:Manual isnt working anymore :/
It is.
Read up a few posts to JunoJohn's post.

or

# direct link
http://www.rolandclan.com/media/3/Juno- ... l%20en.pdf
fabio-bass
Posts: 1
Joined: 14:12, 13 April 2015

Re: Modulator

Post by fabio-bass »

dertrommler wrote:Hi! I just got my long-awaited Juno-G, and I love it! I'm pretty bad with manuals, so I was wondering if you could let me know how to assign different effects to the modulator and the D-Beam. Thanks!
Tecle em [MENU] vá até a opção 2-SYSTEM aí vc achará a opção D BEAM.
Post Reply