Hi guys,
this is my setup...roland Juno G + Novation SL61.
I want Start the sequencer on Juno from the panel of novation.
I selected SLAVE on the juno in the page System midi MMC MTC but the sequencer don't started.
can someone help me?
Control MMC junoG from another keybord
Re: Control MMC junoG from another keybord
iirc you will not be able to do this directly...
You can use the SL61 to start/stop a DAW, and slave the JG to that.
You can use the SL61 to start/stop a DAW, and slave the JG to that.
Re: Control MMC junoG from another keybord
in setup live don't have a pc/daw...
Re: Control MMC junoG from another keybord
Yes you can do this.
Its much easier to use system realtime messages. You can program the Novation keyboard to send system realtime start/stop .
I have the fantom G, MC-808 and Novation Nova, all of whom need clk PLUS realtime start/stop to operate... the Juno G should have similar settings to the Fantom G.
sync mode = slave-midi
clk source = midi
On the Novation ( I have SL remote compact)
global:
clk source auto
clk output M1
template:
all outputs to M1
press edit + play, change message to realtime low value = rt play , button type normal
press edit + stop, msg = realtime stop, button type normal.
I don't currently have FF/RW setup as this requires SPP and haven't been hacked to sort it out..
hope this helps
Its much easier to use system realtime messages. You can program the Novation keyboard to send system realtime start/stop .
Heres a little more info..kernell32 wrote:Hi guys,
this is my setup...roland Juno G + Novation SL61.
I want Start the sequencer on Juno from the panel of novation.
I selected SLAVE on the juno in the page System midi MMC MTC but the sequencer don't started.
can someone help me?
I have the fantom G, MC-808 and Novation Nova, all of whom need clk PLUS realtime start/stop to operate... the Juno G should have similar settings to the Fantom G.
sync mode = slave-midi
clk source = midi
On the Novation ( I have SL remote compact)
global:
clk source auto
clk output M1
template:
all outputs to M1
press edit + play, change message to realtime low value = rt play , button type normal
press edit + stop, msg = realtime stop, button type normal.
I don't currently have FF/RW setup as this requires SPP and haven't been hacked to sort it out..
hope this helps
Re: Control MMC junoG from another keybord
Thanks for the support, but when i press PLAY on sl mk2, the song on juno G don't start...
If I connect Sonar on PC with juno G, I don't have problem, when I play start on Sonar, the seq on juno start also to.
I think the problem is on setting on sl mk2.
If I connect Sonar on PC with juno G, I don't have problem, when I play start on Sonar, the seq on juno start also to.
I think the problem is on setting on sl mk2.
Re: Control MMC junoG from another keybord
JUNO-G only communicates via MIDI if you set the USB mode to STORAGE. Have you done that?
Re: Control MMC junoG from another keybord
I use classic midi cable.
-
- Posts: 70
- Joined: 17:57, 1 February 2014
Re: Control MMC junoG from another keybord
does the juno g sequencer parts have any midi recorded data in it,i found that i had to record some data into the sequencer part even if it is no notes.worth a try.
good luck.
good luck.
Re: Control MMC junoG from another keybord
The JUNO-G can only communicate via MIDI cable if you set the USB mode to STORAGE. Press the USB button and change the mode to STORAGE. Otherwise the MIDI ports on the JUNO do not work.kernell32 wrote:I use classic midi cable.