Output Assign Gets Extra Sounds
Output Assign Gets Extra Sounds
I must be missing something, but when I use the Output Assign for Part 1, and assign it to Output 5, I get a stereo mix signal on Output 5 as well as Part 1. I'm trying to only send Part 1 to Output 5 and leave Parts 2-16 on the normal "A" mix. I'd appreciate any help or advice of how to isolate the one part to an output.
Re: Output Assign Gets Extra Sounds
Welcome to the Clan Jodytx!jodytx wrote:I must be missing something, but when I use the Output Assign for Part 1, and assign it to Output 5, I get a stereo mix signal on Output 5 as well as Part 1. I'm trying to only send Part 1 to Output 5 and leave Parts 2-16 on the normal "A" mix. I'd appreciate any help or advice of how to isolate the one part to an output.
I hope you like it here
Please make sure Motional Surround is OFF, otherwise you won't be able to isolate any Part to any OUTPUT.
That is the trick.. to disable MOTIONAL SURROUND
Cheers,
PauloF
- Monkey Man
- Posts: 287
- Joined: 01:37, 1 July 2013
- Location: Australia
Re: Output Assign Gets Extra Sounds
He's on the ball, this P-Man...
-
- Posts: 7
- Joined: 12:54, 7 May 2016
Re: Output Assign Gets Extra Sounds
I have the same problem, with AND without motional sound, especially the reverb bleeding into other outputs (these 8 outputs are connected to Tascam 32 SD digital recorder for final mixing). Any advice?