System 1m EXT IN gain
System 1m EXT IN gain
I just got an system 1m unit and i love it, thing is that when I plug my microbrute to the EXT IN jack i get a VERY low signal level even though the master volume on the microbrute is on its max value. Any suggestions please? It's driving me crazy.
-
- Posts: 2
- Joined: 07:08, 21 April 2017
Re: System 1m EXT IN gain
Was about muse a bit on line level output and eurorack output, but then found this:
http://www.hars.de/2016/01/microbrute-eurorack.html
Specifically this part:
http://www.hars.de/2016/01/microbrute-eurorack.html
Specifically this part:
andEurorack audio signals usually have a level of ±5V (10Vss), while the mircobrute audio in- and outputs are line level, which usually means at most ±1.7V (3.4Vss) for pro audio.
Hope it helps :)So you need an amplifier with a gain up to three or four if you want to get the signal from the brute into a modular.