BigBANGtheory wrote:Benny I'll have a go at monitoring my FA08 to see if I can capture the SysEx command, off the top of my head it would seem to be a little more involved as you surely need to select a User bank / location to do the write which could be different for each owner.bennyseven wrote: Can somebody check the JP edtor if it has a WRITE button. If so, it would be good to Midi-monitor the sysex commands, so we can check if we can write to the user memory. It is for shure a secret memory location and value.
...update...
Though interestingly when I play the SysEx command back after changing a tone parameter it does not appear to write the new settings it reverts to the original settings. Need to give this some more thought but on the face of that experiment it seems to suggest I captured the wrong SysEx command (or it was not transmitted) or simply that you cannot perform a write with SysEx because Roland have blocked it somehow...
Make of that what you will.
Some Roland hardware ignores commands if the checksum is wrong. I know there is also a temporary memory location that is used until that location is written/stored. But that is about all I know... I haven't done any toying around to find anything out. Just some thoughts.