FA-06/07/08 Editor for Windows

[tchelomgf]

Hello FA community:

I´m just launching the new FA Workstation Editor for Windows.

Installation link: https://dl.orangedox.com/FAEditorInstall

I hope you enjoy it! Donate me a beer if you like it (link in the app), and keep me motivated to continue this development.

If you have troubles, suggestions, comments, just put here in this post.

Cheers!

[MINDKeys]

Congratulations it's very good!
Thanks for your efforts, donated a few beers, well deserved!!! :)

I might have some suggestions for improvements down the road...

It's not said but the Roland FA USB Driver need to be in: VENDOR (MIDI+AUDIO) in General System Settings.
I had it in GENERIC (Midi Only) and it reads everything and sends parts but when sending Studio Set it would freeze the program. It was necessary to unplug the USB or restart FA to work again.

[Paul99]

Wow, thank you very much for your efforts. Great job!

[tchelomgf]

Congratulations it's very good!
Thanks for your efforts, donated a few beers, well deserved!!! :)

I might have some suggestions for improvements down the road...

It's not said but the Roland FA USB Driver need to be in: VENDOR (MIDI+AUDIO) in General System Settings.
I had it in GENERIC (Midi Only) and it reads everything and sends parts but when sending Studio Set it would freeze the program. It was necessary to unplug the USB or restart FA to work again.

Thanks for the beers !!!

I´ve released a new version - 1.0.8.0 - with corrections for GENERIC driver.

Marcelo.

[MINDKeys]

Working great!!! Thank's

[tchelomgf]

New version available at: https://dl.orangedox.com/FAEditorInstall

HowTo´s.pdf

Quick Start Guide

(2.31 MiB) Downloaded 564 times

Thanks!

[Paul99]

Thanks for the update. And thank you especially for the manual. The video you made is very attractive but things are so fast (that is for me it is!) that I could not exactly see what and how. I will check the manual to see if even an old guy can understand your great program!

[neomad]

Hi, first of all, thanks, this is an amazing software that saves a lot of time when you need to prepare your gig.
I am a Mac user, so tried to run with crossover (to run Win apps in Mac) but was unlucky, but I will give a try in my old W7 laptop.
Thank you very much!

[tchelomgf]

I am a Mac user, so tried to run with crossover (to run Win apps in Mac) but was unlucky
Thank you very much!

Could you share some details, error logs, that I can use to investigate and try to make app compatible?

Could you please, check if you can install the following dependency .NET frameworks:
https://www.microsoft.com/en-us/downloa ... aspx?id=22
https://www.microsoft.com/en-us/downloa ... x?id=42642

Thanks!

[tchelomgf]

Hello All:

New Release, with new features:
https://dl.orangedox.com/FAEditorInstall

[November, 15th, 2020] - Version 1.2.0.0
- Wish List implemented:
- Edition of any parameter in Parameter Database window
- Read Studio Set Range for Librarian
- Read User Tones Range for Librarian
- Bugfixed:
- handling of names for USER Tones, sometimes names are not updated properly
- Saving/Sending sysex files with empty USER Tones is crashing
- Tone names with wrong characters
- copy MIDI logs to clipboard not working
- Progress Bar messages crashing
- Done:
- New User Studio Set / User Tones LIBRARIAN
- Load Studio Sets from folder
- Read User Studio Sets range from FA
- Read User Tones from range FA
- Show Tones usage per Studio Set
- Generate Reports
- Save User Studio Sets and User Tones in files
- Load User Studio Sets and User Tones into Editor
- New Parameter Edition widget
- New Parameter hooking and preparation for future Controller Mode feature
- Improvements on Database for faster loading and reading data
- Improvements on MIDI communication for faster reading and sending data
- Improvements on User Interface on parameter updates
- Improvements on Switch Group synchronization with FA
- improvements on Tone Database loading time
- Included missing/undocumented “Receive Source 1-4” parameters

Cheers!

[Paul99]

Thank you very much for updating and all the extra's you created!!!

[Genji Harvester]

Thank you so much for all your work! Being able to call up studio sets to and from the FA and save them to computer in dedicated software is such a nice thing. Wish I had more time to play with it a little more at present. Looking forward to tone editing and whatever else you might be able to cook up. Godspeed!

[neomad]

I am a Mac user, so tried to run with crossover (to run Win apps in Mac) but was unlucky
Thank you very much!

Could you share some details, error logs, that I can use to investigate and try to make app compatible?

Could you please, check if you can install the following dependency .NET frameworks:
https://www.microsoft.com/en-us/downloa ... aspx?id=22
https://www.microsoft.com/en-us/downloa ... x?id=42642

Thanks!

Hello. I have tried also version 1.2, not working. The error I am getting is : Error 255. I am running Crossover 19. You may find more info about this error in this link https://www.codeweavers.com/support/for ... msg=224082
Hope it helps to help us :) thanks !

[tchelomgf]

Hello. I have tried also version 1.2, not working. The error I am getting is : Error 255. I am running Crossover 19. You may find more info about this error in this link https://www.codeweavers.com/support/for ... msg=224082
Hope it helps to help us :) thanks !

Could you provide the full error log like the one in the forum for my executable ?

Thanks!

[tchelomgf]

Hello. I have tried also version 1.2, not working. The error I am getting is : Error 255. I am running Crossover 19.

Since this editor is developed under Visual Studio .NET 2015, could you check if you are able to install the runtime in your Crossover environment ?
https://www.codeweavers.com/compatibili ... le-runtime

Thanks.