Official Juno-G replacements from Roland!
- craigsfrost
- Posts: 80
- Joined: 05:21, 7 March 2018
- Location: SF, CA, USA
- Contact:
Re: Official Juno-G replacements from Roland!
Wow! I paid $335 for about the same work from a certified shop. From now on I ship to Roland directly. Good deal.
-
- Posts: 15
- Joined: 20:44, 29 November 2018
Re: Official Juno-G replacements from Roland!
I had this repair done by Roland in Canada (Richmond Hill location) about 2 years ago I think. All good since having done it.
My only question which they couldn't answer back then was if the new LCD was actually an improved version, or just a new part/same version. I assumed (as did they) that it was a new improved version and should not end up having the same issue as the original one.
I never looked into it since and have had no issues since having it replaced.
My only question which they couldn't answer back then was if the new LCD was actually an improved version, or just a new part/same version. I assumed (as did they) that it was a new improved version and should not end up having the same issue as the original one.
I never looked into it since and have had no issues since having it replaced.
- Leo Castro
- Posts: 139
- Joined: 22:58, 17 June 2016
Re: Official Juno-G replacements from Roland!
Hi, if you have the 2.01 firmware installed in your Juno G, is the new display.
Any version below that number is the old one.
Any version below that number is the old one.
Re: Official Juno-G replacements from Roland!
Question: Is there a post addressing updated information on availability of the
Juno-G backlit replacement screens and alternative sources since Roland Chinese
source no longer provides? Any info would be greatly appreciated. tks. M.
Juno-G backlit replacement screens and alternative sources since Roland Chinese
source no longer provides? Any info would be greatly appreciated. tks. M.
-
- Posts: 5
- Joined: 17:15, 12 May 2015
Re: Official Juno-G replacements from Roland!
I just logged in here after a long time and noticed that a lot of people had asked to post/send the 2.01 update. I've attached them here. I take no responsibility if you brick your keyboard or lose any data or anything, but since it seems Roland isn't great at supplying the required firmware, it seems best leave it in the forums. Good luck and sorry for the very long delay!
- Attachments
-
- JunoG201.zip
- (5.01 MiB) Downloaded 369 times
-
- Juno-G LCD Installation Information.pdf
- (429.85 KiB) Downloaded 438 times
Re: Official Juno-G replacements from Roland!
Do you have any contact for the chinese provider? I am in China and looking for the LCD replacement. Maybe I can find out if anyone has it here.
Re: Official Juno-G replacements from Roland!
Sorry late post plandemic reply. I was never given the Chinese source that was doing the replacement
LCD screens. A local Houston TX keyboard repair shop assured me they had a source for the screens before
I purchased two of the G's- one with and one without working screens. They lied. Went belly up with no
regrets/ explanation given. So I 'm still looking and have no way to program or split/ assign. They're pretty
much sitting in their gig bags in the closet. I'm not inclined to invest in another Roland product since from
what I understand they've not produced a suitable replacement and customer service is in the dumpster.
I'm a bassist who wants the quality analog instrument patches and facets that made the G highly sought after.
ANYONE with any leads on screens or workaround I'd pay good money. 713-679-3333 affordablesoundandlight@gmail.com
LCD screens. A local Houston TX keyboard repair shop assured me they had a source for the screens before
I purchased two of the G's- one with and one without working screens. They lied. Went belly up with no
regrets/ explanation given. So I 'm still looking and have no way to program or split/ assign. They're pretty
much sitting in their gig bags in the closet. I'm not inclined to invest in another Roland product since from
what I understand they've not produced a suitable replacement and customer service is in the dumpster.
I'm a bassist who wants the quality analog instrument patches and facets that made the G highly sought after.
ANYONE with any leads on screens or workaround I'd pay good money. 713-679-3333 affordablesoundandlight@gmail.com
- Leo Castro
- Posts: 139
- Joined: 22:58, 17 June 2016